Jeld-wen SIV002 Aluminum Extension Jamb for Vinyl Patio Doo Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la maison Jeld-wen SIV002 Aluminum Extension Jamb for Vinyl Patio Doo. JELD-WEN SIV002 Aluminum Extension Jamb for Vinyl Patio Doors User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 1
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Aluminum Extension Jamb Installation
for Vinyl Patio Doors
The Summit
®
Collection
SIV002 (03/04)
E
xtension jambs for vinyl patio doors attach to the rough opening from the
interior after the door has been secured to the rough opening. The extension jambs
overlap the frame (fig. 1), extending the door width to fit a 4
9/16" or 6 9/16" wall
(double or single-shear). Because the extensions are a replacement for a drywall
return, they must be installed before the sheet rock.
Preparation
Verify the correct length. The head extension jamb should be the length of the door
frame header +
1/4". The side extension jambs will butt up to the head and should be
1/8" shorter than the length of the door frame side jambs. Cut the extension jambs to
length.
Installation
1 Install the patio door according to the instructions attached to the product
2
The extension jambs will fit between the rough opening and the frame; notch the
extension jambs to fit around the shims as needed (fig. 2)
3
Slip one side extension jamb between the frame and the rough opening; slide it
against the door frame, flush with the top of the door frame
4 Secure the side extension jamb to the trimmer (or jack) stud with nails 1" from each end and every 12" in between
(fig. 3)
5
Install the opposite side extension jamb, then the head extension jamb (fig.4); head extension jamb should rest on
top of the door frame and evenly overhang both side extension jambs
Tools/Materials
Tape measure
Hacksaw
Nailing gun or hammer
8d nails or similar
The advice offered herein should be reviewed and performed by a trained service provider. It is recommended that you consult with a competent and
licensed construction contractor or building professional prior to taking any action. JELD-WEN disclaims any and all liability associated with the use
and/or provision of these instructions. Any reliance upon the information or advice is at the risk of the party so relying. The information contained herein
may be changed from time to time without notification.
© 2004 JELD-WEN, inc. JELD-WEN and Summit are registered trademarks of JELD-WEN, inc., Oregon USA
.
Degree of Task Complexity
Do-It-Yourself
Technician
Fig. 4. Secure head extension jamb
Fig. 3. Secure side extension jamb
Nails
Sheet rock (applied after
installation)
Trimmer
stud
Fig. 1. Extension jamb
Nailing Fin
Extension
jamb
Door
frame
King
stud
Fig. 2. Notch extension jamb
H
e
a
d
e
r
D
o
o
r
F
r
a
m
e
Notch
H
e
a
d
e
r
D
o
o
r
F
r
a
m
e
D
o
o
r
Fr
a
m
e
Vue de la page 0
1

Résumé du contenu

Page 1 - Installation

Aluminum Extension Jamb Installation for Vinyl Patio Doors The Summit® Collection SIV002 (03/04) E xtension jambs for vinyl patio doors attach to the

Commentaires sur ces manuels

Pas de commentaire