Jeld-wen JII019 Impact Handle and Lock Set Manuel d'utilisateur télécharger pdf

INSTALLATION INSTRUCTIONS

for Impact Handle and Lock Set (JII019)

Thank you for selecting JELD-WEN products. Attached are JELD-WEN’s

recommended installation instructions for the impact handle and lock

set. Read these instructions thoroughly before beginning.

These instructions supplement the assembly and installation

instructions for the patio door. Please use both the attached

instructions and this supplement to properly install the patio door.

Note to Installer: Provide a copy of these instructions to the building

owner. By installing this product, you acknowledge the terms and

conditions of the limited warranty as part of the terms of the sale.

SAFETY

Wear protective gear (e.g. safety glasses, gloves, ear protection, etc.).•

Operate hand/power tools safely and follow manufacturer’s operating •

instructions.

Use caution when working at elevated heights.•

IF INJURY OCCURS, IMMEDIATELY SEEK MEDICAL ATTENTION!

IMPORTANT INFORMATION

INSTALL HANDLE & LOCK SET

INCLUDED PARTS

A Interior/exterior

handles

B Lock body

C Face plate

D Cylinder locks

E Lock keeper

Items not shown:

- Assembly screws

- Keys

NEEDED TOOLS

- Small at head

screwdriver

- Phillips screwdriver

- Drill with bits and

drivers

INCLUDED PARTS & NEEDED TOOLS

INSTALL HANDLES & CYLINDER LOCKS

1. Install the handles

using the two 2 1/4"

machine screws. Install

the handle with screw

holes on the interior.

2. If the lock body has

not been installed

into the jamb of the

operating panel, align

the cylinder lock holes

with the holes in the

panel and secure with

two 3/4" screws. Do

not fully tighten the

lock body screws.

3. Back out the two

cylinder lock security

screws until they do

not block the cylinder

lock holes.

4. Slip a lock washer

onto each cylinder

lock.

5. Position the keyed

cylinder lock unit on

the exterior side of

the door panel, and

the turn latch on the

interior.

6. Simultaneously screw the cylinder lock units in opposite directions

into the holes on both the interior and exterior of the door panel

until they are snug with the door panel. Both must be positioned at

6 o’clock so that the security screws will engage the groove in the

cylinder locks.

7. Use a small at head screwdriver to tighten the security screws until

they are ush with the face of the lock body.

Note! If the security screws are tight but not ush, the cylinder lock

units will need to be rotated slightly clockwise or counterclockwise.

8. Test the lock to make sure it functions properly.

9. Tighten the lock body screws.

INSTALL FACE PLATE & KEEPER

1. Install the face plate

using a 3/4" screw at

the top and bottom

and a 1/4" screw in

the middle.

2. Extend the lock hook

and hang the keeper

on the hook with the

metal spring ap up

and facing the jamb.

3. Close the door and

mark the jamb at the

top and bottom of the

keeper.

4. Position the keeper

between the marks

and drive a #10 x 3"

screw in the center

of each elongated

adjustment hole.

5. Close the door and

test the lock to make

sure it engages the

keeper properly.

Adjust up or down as

necessary.

6. Drive screws into the

remaining two holes

and tighten all screws.

Lock body

Interior

handle

Exterior

cylinder

lock

Security

screw

groove

Lock

washer

Interior

cylinder

lock

Face

plate

Lock

keeper

Adjustment

hole

(08/08)

All other trademarks are the property of their respective owners.

Security

screws

Résumé du contenu

Page 1 - INSTALL HANDLE & LOCK SET

INSTALLATION INSTRUCTIONSfor Impact Handle and Lock Set (JII019)Thank you for selecting JELD-WEN products. Attached are JELD-WEN’s recommended install

Commentaires sur ces manuels

Pas de commentaire

Jeld-wen JII019 Impact Handle and Lock Set Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la maison Jeld-wen JII019 Impact Handle and Lock Set. JELD-WEN JII019 Impact Handle and Lock Set User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la maison Jeld-wen JII019 Impact Handle and Lock Set